pcbn general turning - iso inserts | secotools.com

PCBN General Turning - ISO Inserts | Secotools.com

SECO SOLID PCBN WIPER INSERTS FOR FINISH HARD TURNING In turning with a single-point tool, the surface finish is determined by the feed rate and nose radius, as these are in a direct relationship to the profile height of the surface (Rmax). This means that the higher the feed, the rougher the surface generated by the edge of a given nose radius.

Ask For Price
pcbn cutting tools & inserts for turning | shape-master tool

PCBN Cutting Tools & Inserts for Turning | Shape-Master Tool

Shape-Master Tool was founded in 1976 as a niche natural diamond tool fabricating company; industry standards required a chip free finish at 1000x magnification. As the company has grown and evolved into a leading Polycrystalline cutting tool manufacturer, we continue to pride ourselves on providing the best edge quality in the industry.

Ask For Price
bc8100 / mb8100 series | coated cbn grades for high ...

BC8100 / MB8100 Series | Coated CBN Grades for High ...

WL Wiper Insert. Preventing the cutting edge from vibration during boring and turning of small diameter workpieces as well as providing excellent finish surface roughness. Applying slight slope on the wiper cutting edge reduces cutting resistance.

Ask For Price
composite pcbn cutting tools for machinery parts , high ...

Composite PCBN Cutting Tools for machinery parts , High ...

Composite PCBN Cutting Tools for machinery parts , High Quality Surface Finish. Features: 1. Finishing and rough machining of gray cast iron, finish machining of high-manganese and hardened steels good wear-resistance, excellent toughness and high impact resistance for interrupted cutting, high feed rates in machining.

Ask For Price
pcbn & pcd inserts - brisloy tools

PCBN & PCD Inserts - Brisloy Tools

PCD Inserts PCD Inserts for super surface finish along with excellent wear resistant at extremely high cutting speed for Aluminium components. PD100, PD200 – PCD Grades below 1 micron Substrate with Sharp edge for high speed turning and milling application of Aluminium alloys.

Ask For Price
pcbn pcd inserts - sf diamond


Full face PCBN inserts. Cylinder block and head of automobile Engine, gear,camshaft,roll and brake disc. Good wear resistance. Resharpening . Solid PCBN. Cylinder block and head of automobile Engine, roll and brake disc. High impact resistance. High wear resistance. Good surface quality . PCD inserts. Wheel hubs. Long life. High efficiency . Good surface finish

Ask For Price
what's the best insert for finishing steel? : modern ...

What's the Best Insert for Finishing Steel? : Modern ...

Kyocera’s PV710 cermet grade with its super smooth MEGACOAT NANO PVD coating provided the best surface finish and maintained the highest degree of consistency throughout the test, though at a slower cutting speed. Here too, the uncoated insert showed the most rapid decline due to its wear rate, and carbide was not able to achieve the levels of surface finish generated by the cermets.

Ask For Price
hard part turning with cbn - sandvik coromant

Hard part turning with CBN - Sandvik Coromant

A CBN insert can withstand the high cutting temperatures and forces and still retain its cutting edge. This is why CBN delivers long, consistent tool life and produces components with excellent surface finish.

Ask For Price