Diamond Tipped Indexable – Scientific Cutting Tools, Inc.
Tool height when boring should be slightly above center. Tool deflection will put the tool on center. Do not stop the machine with the tool in cut. This will result in tool breakage. Use of coolant will reduce heat and improve surface finish. Do not contact the tool to a hard surface prior to the machining process - this will cause chipping.Ask For Price
Single-Crystal Diamond Cutting Tool for Ultra-Precision ...
diamond cutting tools (Photo 1) have contributed to high-accuracy microscopic processing of workpieces to an accuracy of several nanometers. A.L.M.T. Corp. began to develop an ultra-precision diamond cutting tool that would be used for the mirror-finishing of the aluminum substrates of hard disk drives (HDDs). At present, ultra-Ask For Price
Pcd Diamond Internal Turning Tool Cylinder Boring Thread ...
Pcd Diamond Internal Turning Tool Cylinder Boring Thread Tools For Aluminium , Find Complete Details about Pcd Diamond Internal Turning Tool Cylinder Boring Thread Tools For Aluminium,Diamond Turning Tool,Turning Tool,Boring Tool from Turning Tool Supplier or Manufacturer-Ningbo GH Diamondtools Co., Ltd.Ask For Price
milling cutting insert / non-ferrous / square - WALTER
These inserts have been specifically developed for the Walter BLAXX M3024 heptagon face milling cutter, enabling it to now be used for finishing operations. The large number of cutting edges – 2 + 2 on the new finishing inserts and 16 on the roughing inserts– ensures high cost efficiency.Ask For Price
Milling | Diamond Tooling Systems - DTS GmbH
DTS has developed extensive expertise in the field of PCD and CVD equipped carbide metal milling tools in recent years. Whether for tool and mold construction or the processing of non-ferrous metals, plastics, PEEK, ceramics, foams and especially abrasive materials, our wide range of metal milling tools of Ø 1-20mm always ensures the most suitable tool.Ask For Price
Boring Inserts - MSC Industrial Supply
Boring bar inserts are used for enlarging or finishing the inside diameter of a pre-existing hole. The inserts are designed with multiple cutting edges so they can be rotated after wear to reveal ...Ask For Price