hard part turning with cbn inserts - halnn tools

Hard Part Turning with CBN Inserts - Halnn Tools

Cutting Condition of Halnn CBN for hard turning CBN Content Characteristics Insert Grade Depth of Cut (mm) Recommend Cutting condition Suited Materials Typical Application Low Content CBN Toughnes (Roughing) BN Hardness (Finishing) ≤1mm BN -S20 1 10mm Interrupt Continuous Hardened Steel, Heat and abrasive

Ask For Price
cbn tipped insert speed and feed chart – scientific ...

CBN Tipped Insert Speed and Feed Chart – Scientific ...

SCT CBN inserts are excellent for continuous cutting of a wide range of hardened steels, powdered metals, cast irons and super alloys. The inserts are precision ground with hones for machining to sub-micron finishes with maximum tool life. CBN tipped inserts can take the place of grinding.

Ask For Price
inserts for difficult materials : modern machine shop

Inserts For Difficult Materials : Modern Machine Shop

Inserts For Difficult Materials Economic efficiency is an important consideration when choosing tools for challenging metals. CBN inserts incorporating reinforced, chamfered edges eliminate the edge breakout common when cutting materials harder than 50 RC.

Ask For Price
j & m diamond tool: hard turning solutions with cbn

J & M Diamond Tool: Hard Turning Solutions with CBN

CBN tools permit metal cutting at feeds and speeds much higher than with conventional cutting tool materials. CBN tools also turn, bore and face hard materials, which otherwise can be formed only by grinding. Because CBN tools maintain a sharp cutting edge, surface finishes are excellent, close tolerances are easy to maintain, and dramatic ...

Ask For Price
iscar cutting tools - metal working tools - iso-turning ...

ISCAR Cutting Tools - Metal Working Tools - ISO-Turning ...

ISO-Turning - - TCMT (CBN) : Triangular positive inserts with a single CBN flat rake tip for machining hardened steel.

Ask For Price
turning inserts and grades for hardened steel

Turning inserts and grades for hardened steel

Turning inserts and grades for hardened steel. Turning hardened steel calls for super-hard insert grades. Whatever your component or requirements for surface finish, find productive insert grades here that can withstand high temperatures and cutting forces and still retain their cutting edges.

Ask For Price
hard part turning with cbn - sandvik coromant

Hard part turning with CBN - Sandvik Coromant

CBN grain size distribution with a mix of large and fine CBN grains (4 & 12 µm). The main application area is high alloy cast irons but this grade will also perform well in turning of hardened steel and cast iron rolls. CB7925 CBN inserts are only available in solid format. CB7925 Cutting data recommendations Cutting speed, vc m/min (ft/min)

Ask For Price
turning inserts and grades for hardened steel

Turning inserts and grades for hardened steel

Turning inserts and grades for hardened steel. Turning hardened steel calls for super-hard insert grades. Whatever your component or requirements for surface finish, you will find productive insert grades here that can withstand high temperatures and cutting forces and still retain their cutting edges.

Ask For Price